3 in 1 Paper Corner Rounder (R4mm+R7mm+R10mm),Punches for Crafts,Cutter,Envelope Punch Board,Hole Puncher,Laminate, DIY Projects, Photo Cutter,Card Making Scrapbooking and Journaling

About this item

• Great for cutting corners: Rounding corners on photos, name cards, papers, cardstocks, stationery, Invitations, thin foam sheets and other all kinds of paper sheets
• This type of embossing device requires high quality paper. Please use 160 GSM - 220 GSM paper. If your paper is too thin, please use 2-3 layers.
• For sharpening cutting mechanism, cut thin aluminum foil. For lubricating cutting mechanism, cut out wax paper and foam color paper
• Material is ZBS+Zinc alloy，Stainless steel cutter blade is sharp enough for ensuring precision cutting for a neat and clean appearance.
• Note- a. If the cuts are not perfect then try to adjust the edge properly. b. Try to turn the punch upside down to see if the edges have been set properly in the punch. c. Avoid using too thick PVC sheets as it could damage the cutter. d. Just like every machine this product too has a life cycle. The sharpness of the blades decreases after multiple uses.
• Note- e. Always clean the cutter properly after using to ensure perfect cuts afterward. f. Avoid using wet and oiled paper as it can leave small tiny bits inside the cutter. g. If processing a self-adhesive sheet then make sure to use a good quality self-adhesive sheet. h. When you use any sheet, always make sure that the edges should be clean and straight, for a perfect round-cut.